Call Us Today! (832) 334-1105

  • facebook
  • youtube
  • rss feed
  • Share Best Pools

Rocksteel WL350: Wet Look

RockSteel WetLook WL350 is a revolutionary professional, deep penetrating silicone/acrylic high gloss sealer for use in general application but particularly effective in wet areas around pools, fountains and other water prone areas where hydro-static pressure maybe a concern. WL350 leaves a high gloss wet-look finish while sealing and protecting against stains and salt water infiltration.



  • Creates enhanced, glossy wet look on porous and semi-porous substrates
  • Uniformly darkens the surface
    of most stone
  • Prevents saltwater rock erosion
    ideal for wet areas;
    pools, fountains, waterfalls
  • Deep penetration into the substrate allows trapped water vapor to pass releasing potential pressures
  • Retards efflorescence
  • Fast curing, begins penetrating in seconds, cures in 30 minutes to 1 hour, depending upon temperature and porosity
  • Resistant to many types of stains;
    makes removal easier
  • Resistant to pool chemicals, oils, gas,
    and many vehicle created stains
  • Use indoors or outdoors


COVERAGE: Depending upon the porosity of the surface, 200 - 400 sq. ft. per gallon. Two coats are recommended versus one thick coat. Very porous rock and isolated areas within a rock may require multiple coats reducing coverage rates. Always test an area before application. See application instructions for important application and use details.
Flash PointVOC ContentColorUnit
580°F 4.4g/L Transparent 1g/3.79L

We will strive to exceed every customer’s expectations. In the case that a customer is less than satisfied, we will perform additional services to correct the issues, however, no refunds will be given.